Sumida Flexible connections

PANTA© HT Jumper

PANTA<sup>©</sup> HT Jumper

Jumper for permanent operation temperature of 150°C e.g. gearbox application, motor application, white goods

CHARACTERISTICS

  • economic alternative compared to Flex-rigid or Flex PCB
  • connection of electronic components
    - board to board
    - board to sensors
  • temperature range: -40°C to 150°C
  • insulating material: Polyimid
  • length: 25 - 200mm
  • wire diameter: 0,32 - 0,51mm
  • Pitch: A = 2,54mm, B = 1,27mm, D = 2,00mm
  • Number of pins: max. 32

BENEFITS

  • Smooth notch-free transition from flat to round
  • Break-proof connection point
  • Compensation of natural oscillations
  • Voltage reduced in the soldering area
  • Avoidance of vibration resonances

PASSED ANALYSIS TEST

Lifetime Tests
  • temperature storage (1000h @ 170°C)
  • Pressure-Cooker-Test (96h @ 140°C)
  • humidity test (pre-ageing + 14 days @ 32°C & 85% rH)
  • temperature shock storage (1000 cycles -40°C - 150°C)
UL758
  • heat shock test @ 180°C
  • Dielectric test with aged samples (7 days @ 180°C)
  • solder bath test
  • Cold bending test (4h @ -10°C)
  • Bending test after 7 days @ 180°C

ORDER CODE

order code

CONNECTION TYPES

 

TECHNICAL DATA

 

Order Code

BDA
Pitch (mm)1,272,02,54
Number of pins max.323232
Length (mm)30 - 20030 - 20030 - 200
Edge insulation min. (mm)0,80,80,8
Pin diameter (mm)0,320,40,51
Wire size (AWG)282624
Flat conductor width (mm)0,751,351,27
Flat conductor thickness (µm)100110110
Conductor materialCopper Cu-ETP (E-Cu);
tin-plated
Copper Cu-ETP (E-Cu);
tin-plated
Copper Cu-ETP (E-Cu);
tin-plated
Current carrying capacity at 20°C (A)1,52,03,5
Rated voltage VDC200200300
Dielectric strength (VDC/min)70015001500
InsulationPolyimidPolyimidPolyimid
Operating temperature (°C)-40 ... +150-40 ... +150-40 ... +150
Soldering temperature (°C/sec.)260/5260/5260/5

Further versions on request.

 

PANTA HT Jumper (PDF, 247 kB)

 

‹ zurück