PANTA^© FIX JUMPER ............ PANTA^© FIX POWER JUMPER

PANTA FIX JUMPER are highly flexible PCB connectors. Due to the combination of PANTA round-flat-round technology, the copper wires are rolled flat in a defined manner in the area of the insulation and thus guarantee the highest requirements for vibration and bending resistance. The smooth and notch-free transition from round to flat guarantees a break-proof connection point. The round conductors in the connection area guarantee fast and safe shoring. Polyester, aramid fiber, PEN (polyethylene naphthalate) or polyimide can be used for insulation.

Features

Tinned round conductor flat rolled
Round pins for soldering in for THT (through-hole-technology)
Combination with plug / connector system possible
Wide range of connection types selectable
Freely configurable length (12mm - 5,000mm)
Different pitches available within one jumper (MIX)
Short insulation lengths also as wire bridge (without flat rolled copper conductor)

Characteristics

High vibration and bending resistance
Unbreakable and reliable connection
Temperature-resistant insulation materials (-40°C to +125 °C)

Customer benefits

Low space requirement due to the overall height
No setup effort for medium and small batch sizes
Simple assembly design with multiple PCBs
Boards in different geometric layers can be connected
Combination with different connection technologies possible (Link IDC)
Can be used for manual placement and automatic placement (on request)

Technical data

PANTA FIX Jumper

Order code	E	G	B	L	D	F	A	Z	P	R	C
Pitch (mm)	1,0	1,25	1,27	1,9	2,0	2,5	2,54	3,18	3,5	3,81	5,08
Number of poles max.	32	32	32	32	32	32	32	25	23	20	16
Bridging length (mm)
Total length (mm)	15 - 5.000
Edge insulation min (mm)	0,3	0,3	0,3	0,3	0,3	0,3	0,3	0,3	0,3	0,5	0,5
Pin diameter (mm)	0,32	0,32	0,32	0,4	0,4	0,51	0,51	0,51	0,51	0,51	0,51
Conductor material	Cu acc. to DIN 40500; min. 1.5μm tin-plated					2 - 3μm tin plated
Wire size (AWG)	28	28	28	26	26	24	24	24	24	24	24
Flat conductor width (mm)	0,7	0,75	0,75	1,35	1,35	1,5	1,5	1,5	1,5	1,5	1,5
Rated voltage V_DC	200	200	200	200	200	300	300	300	300	300	300
Dielectric strength (V_DC/min)	700	700	700	1.500	1.500	1.500	1.500	1.500	1.500	1.500	1.500
Current carrying capacity at 20 °C	1,0	1,5	1,5	2,0	2,0	3,5	3,5	3,5	3,5	3,5	3,5

PANTA FIX POWER

PANTA© FIX POWER JUMPER are flexible flat conductor connectors, especially for applications with current carrying capacity up to 12 amperes.

Order Code	F	A	P	N	M	C	K	J
Pitch (mm)	2,5	2,54	3,5	3,96	5,0	5,08	7,0	7,5
Number of poles max.	15	15	8	8	8	8	8	8
Length mm	25-999 in 0.1 gradation; special length up to 5,000
Edge insulation max. (mm)	freely selectable up to 10
Edge insulation min. (mm)	1,0	1,0	1,0	1,0	1,0	1,0	1,0	1,0
Pin diameter (mm)	0,72	0,72	0,91	0,91	0,91	0,91	0,91	0,91
Wire size (AWG)	21	21	19	19	18	18	18	18
Flat conductor width (mm)	2,0	2,0	3,2	3,2	3,2	3,2	3,2	3,2
Flat conductor thickness (µm)	200
Conductor materials	2-3 µm tin plated
Current carrying capacity at 20 °C	8	8	12	12	12	12	12	12
Rated voltage V_DC	300
Dielectric strength (V_DC/min)	1.500

Insulation materials
Insulation	Polyester	Aramid	PEN	Polyimid	High Temprature Version
Insulation resistance (ground-signal-ground) (Ω)	>10¹⁰
Operating temperature (°C)	-40°C up to +105°C	-40°C up to +125°C			-40°C up to +150°C
Flammability	UL 94 V-0
Soldering temperature (°C/s)	250/4	260/5

_{We reserve the right to make changes in the interest of technical progress and further development.}

Application specification

Order Code	E	G	B	L	D	F	A	Z	P	R	C
Pitch (mm)	1,0	1,25	1,27	1,9	2,0	2,5	2,54	3,18	3,5	3,81	5,08
Min. bending radius (mm) when folding once	0,3	0,3	0,3	0,3	0,4	0,4	0,5	0,5	0,5	0,5	0,5
Recommended solder profile	DIN EN 61760-1 / J-STD-020 THT solder profile and reflow solder profile
Soldering temperature (°C/s)	see Technical data - Insulation materials
Storage conditions	6 months / <25°C / max. 50% rel. H

Connection forms

Connection types for pitch <1.27 on customer request (special production))

_{Fig.: The respective connection types can be selected separately for each side and can also be combined with Panta® FLL, Panta® FIX CRIMP as well as Panta® ZIF connections.}