Sumida Flexible connections


PANTA<sup>©</sup> FLL

PANTA© FLL connectors are highly flexible flat conductor connectors. Small pitches and minute dimensions allow connections in very small spaces.


  • Immediately ready for installation
  • High vibration and bending resistance
  • Suitable for SMT (e. g. thermode soldering / hot bar soldering)
  • High-quality insulation materials (−40°C to +125°C)
  • Minimum dimensions through thin foils and small pitches
  • Standard contact zone 2.5 mm
  • Short bridging lengths available


  • Compatible with PANTA© FIX with round solder pins
  • Compatible with PANTA© ZIF connections
  • Special versions of insulation foil (punching of holes or trenches)
  • Insulation material (e. g. NOMEX) suitable for thermode soldering / hot bar soldering

Order Code

order code

Technical Data

Technische Daten

DPitch (mm)0,50,81,01,251,272,02,52,54
Pole number max.6–504–304–302–302–302–162–162–16
ALength (mm)12–999; Special lengths from 7 bis 5.000
BTotal width (mm)(pole number + 1) x pitch
GFlat conductor width (mm)0,30,50,70,80,81,351,51,5
Flat conductor thickness (µm)100100100100100100127127
Conductor materialCU acc. to DIN 40500; tin-plated, µm min. 1,0
Current carrying capacity at 20 °C (A)0,51,01,01,51,52,03,03,0
Rated voltage (VDC)30100200200200200300300
Dielectric strength (VDC/min)1003007001.1001.1001.5001.5001.500


Insulation material
for pitch (mm)0,5–2,54
for conductor size (AWG)24
Insulation resistance
(Ground-Signal-Ground) (Ω)
> 1010
Operating temperature (°C)−40 … +105−40 … +125−40 … +125−40 … +125
Soldering temperature (°C/s)250/4260/5260/5260/5
Storage conditions6 months /  <25°C / max. 50% rel. H

We reserve the right to make changes that serve technical progress and further development.

PANTA© FLL Katalog (PDF) »

All Sumida catalogues are available for download »

‹ zurück